Moxa Technologies EDS-405A Installation Guide Page 1

 2014 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802004000018 EDS-405A/408A Series Hardware Ins

- 10 - ATTENTION This product is intended to be mounted to a well-grounded mounting surface, such as a metal panel. Wiring the Relay Contact The Re

- 11 - Communication Connections EDS-408A models have 5, 6, or 8 10/100BaseT(X) Ethernet ports, and 3, 2, or 0 (zero) 100BaseFX (SC/ST-type connector

- 12 - Remember to connect the Tx (transmit) port of device I to the Rx (receive) port of device II, and the Rx (receive) port of device I to the Tx

- 13 - Turbo Ring DIP Switch Settings EDS-405A/408A series switches are plug-and-play managed redundant Ethernet switches. The proprietary Turbo Ring

- 14 - NOTE If you do not enable any of the EDS-405A/408A switches to be the Ring Master, the Turbo Ring protocol will automatically choose the EDS-4

- 15 - 100M (TP) GREEN On TP port’s 100 Mbps link is active. Blinking Data is being transmitted at 100 Mbps. Off TP Port’s 100 Mbps link is inactive.

- 16 - Power Input Voltage EDS-405A/408A: 12 to 45 VDC, redundant inputs EDS-408A-3S-SC-48: ±24/±48 VDC (-60 to -19 VDC or 19 to 60 VDC), redundant i

- 17 - Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-677

- 2 - Overview The Moxa EtherDevice™ EDS-405A/408A series, which includes both 5 and 8-port smart Ethernet switches, is a cost-effective solution for

- 3 - EDS-405A/408A Panel Layout (standard) 1. Grounding screw 2. Terminal block for power input PWR1/PWR2 and relay output 3. Heat dissipation

- 4 - EDS-405A/408A-MM (SC-type) Panel Layout NOTE: The appearance of the EDS-405A-SS-SC is identical to that of the EDS-405A-MM-SC. The appearan

- 5 - EDS-405A/408A-MM (ST-type) Panel Layout 1. Grounding screw 2. Terminal block for power input PWR1/PWR2 and relay output 3. Heat dissipati

- 6 - EDS-408A-3M Panel Layout (SC/ST-type) NOTE: The appearance of the EDS-408A-3S-SC, EDS-408A-1M2S-SC, and EDS-408A-2M1S-SC are identical to t

- 7 - Mounting Dimensions (unit = mm) Unit = mm (inch)

- 8 - DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the EDS-405A/408A when you take it out of

- 9 - ATEX Information 1. Certificate number: DEMKO 08 ATEX 0712961X 2. Ambient range (-40°C ≤ Tamb ≤ 75°C) 3. Certification string: EDS-405A: E