2013 Moxa Inc. All rights reserved. P/N: 1802005100040 EDS-510E Series Hardware Installation Guide Moxa EtherDevice™ Switch First Editi
- 10 - (straight-through or cross-over), and the type of device (NIC-type or HUB/Switch-type) connected to the port. In what follows, we give pinouts
- 11 - 100/1000BaseSFP (mini-GBIC) Fiber Port The gigabit Ethernet ports on the EDS-510E are 100/1000BaseSFP Fiber ports, which require using the 100
- 12 - Turbo Ring DIP Switch Settings EDS-510E series are plug-and-play managed redundant Ethernet switches. The proprietary Turbo Ring protocol was
- 13 - NOTE You must enable the Turbo Ring function first before using the DIP switch to activate the Master and Coupler functions. NOTE If you do
- 14 - LED Color Status Description Blinking 1. The switch has become the Ring Master of the Turbo Ring. 2. The Head of the Turbo Chain, after the
- 15 - Specifications Technology Standards IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3
- 16 - guaranteed to function properly at higher altitudes. Regulatory Approvals Safety UL 508 EMI FCC Part 15 Subpart B Class A EMS EN 61000-4-2 (E
- 2 - Package Checklist The EDS-510E is shipped with the following items. If any of these items are missing or damaged, please contact your customer
- 3 - Panel Views of EDS-510E Front Panel Top Panel Rear Panel Front Panel 1. 1 to 7 port status LED 2. 1 to 7: 10/100BaseT(X) port 3. S
- 4 - Mounting Dimensions Unit = mm (inch)
- 5 - DIN-Rail Mounting The metal DIN-rail kit is fixed to the back panel of the EDS-510E when you take it out of the box. Mount the EDS-510E on corr
- 6 - Wall Mounting (Optional) For some applications, you will find it convenient to mount Moxa EDS-510E on the wall, as shown in the following illus
- 7 - ATTENTION This unit is a built-in type. When the unit is installed in another piece of equipment, the equipment enclosing the unit must comply
- 8 - FAULT: The two contacts of the 6-pin terminal block connector are used to detect user-configured events. The two wires attached to the fault c
- 9 - USB Console Connection The EDS-510E has one USB console port (type B connector), located on the top panel. Use the USB cable (provided in the p
Comments to this Manuals