Moxa Technologies EDS-518A Series Installation Guide download pdf (Page 14)

- 14 -

TP/SFP port’s 1000 Mbps link is

active.

Blinking

Data is being transmitted at 1000

Mbps.

1000M

(TP/SFP)

GREEN

Off

TP/SFP port’s 1000 Mbps link is

inactive.

Specifications

Technology

Standards IEEE 802.3 for 10BaseT,

IEEE 802.3u for 100BaseT(X) and 100Base FX,

IEEE 802.3ab for 1000BaseT(X),

IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,

IEEE 802.3x for Flow Control,

IEEE 802.1D for Spanning Tree Protocol,

IEEE 802.1w for Rapid STP,

IEEE 802.1Q for VLAN Tagging,

IEEE 802.1p for Class of Service,

IEEE 802.1X for Authentication,

IEEE 802.3ad for Port Trunk with LACP

Protocols IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3,

DHCP Server/Client, DHCP Option 66/67/82,

BootP, TFTP, SNTP, SMTP, RARP, RMON,

HTTP, HTTPS, Telnet, SSH, Syslog, IPv6, LLDP,

IEEE 1588 PTP, Modbus/TCP, SNMP Inform

MIB MIB-II, Ethernet-like MIB, P-BRIDGE MIB,

Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON

MIB Group 1,2,3,9

Interface

RJ45 Ports 10/100/1000BaseT(X) auto negotiation speed, F/H

duplex mode, and auto MDI/MDI-X connection

Fiber Ports Optional 100BaseFX (SC/ST connector) and

1000BaseSFP slot

Console Port RS-232 (10-pin RJ45)

LED Indicators PWR1, PWR2, FAULT, 10/100M (TP port), 100M

(fiber port), 1000M, MSTR/HEAD and CPLR/TAIL

Alarm Contact Two relay outputs with current carrying capacity of

1A @ 24 VDC

Digital Input Two inputs with the same ground, but electrically

isolated from the electronics

• For state “1”: +13 to +30V

• For state “0”: -30 to +3V

• Max. input current: 8 mA

Optical Fiber-100BaseFX

Optical Fiber-1000BaseSX/LX/LHX/ZX

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Moxa Technologies EDS-518A Series Installation Guide Page 14

Comments to this Manuals

Related products and manuals for Network switches Moxa Technologies EDS-518A Series