Moxa Technologies ETHERDEVICE EDS-305 Installation Guide

Moxa EtherDevice Switch EDS-305-M12 Layer 2 M12/IP67 unmanaged Ethernet switches Hardware Installation Guide Fourth Edition, Septembe

- 10 -Auto-Negotiation and Speed Sensing All of the EDS-305-M12’s Ethernet ports independently support auto-negotiation for speeds in the 10BaseT an

- 11 -Operating relative humidity 5 to 95% (non-condensing) Regulatory Approvals Safety UL 508 Hazardous Location UL/cUL Class1, Div.2, ATEX Class1

- 2 -Overview The Moxa EtherDevice™ EDS-305-M12 series of 5-port smart Ethernet switches provides a hardened and cost-effective solution for your Et

- 3 -EDS-305-M12 Panel Layouts Front Panel View EDS-305-M1212354687877 1. M12 port’s 10/100 Mbps LED. 2. 10/100BaseT(X) port (4-pin female shielde

- 4 -Panel/Wall Mounting To mount the EDS-305-M12 on the wall use the 3 screws included in the panel mounting kit. STEP 1: Make 3 screw holes on the

- 5 -Wiring Requirements WARNING Turn the power off before disconnecting modules or wires. The correct power supply voltage is listed on the produc

- 6 -Grounding the EDS-305-M12 Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground

- 7 -Pinouts for sockets on EDS-305-M12 TP Port -Pin 1: -Pin 2: -Pin 3: -Pin 4: TD + RD + TD - RD - Power input -Pin 1:-Pin 2:-Pin 3:-Pin 4:-Pin 5:

- 8 -M12 (4-pin, M) to M12 (4-pin, M) Straight-Trough Cable Wiring Tx+Rx+Tx-Rx-Straight-through Cable Wiring12 3412 34Rx+Tx+Rx-Tx- M12 (4-pi

- 9 -Dual Speed Functionality & Switching The EDS-305-M12’s 10/100 Mbps switched M12 ports auto negotiate with the connected device to use the f