Moxa Technologies VPort 36-1MP Installation Guide

 2012 Moxa Inc. All rights reserved. VPort 36-1MP Series Quick Installation Guide First Edition, March 2012 P/N: 1802000360010

- 10 - Step 3: Install the ActiveX Control Plug-in A security warning message will appear the first time you access the VPort’s web-based manager. Th

- 11 - Wiring Requirements ATTENTION Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa VPort 36-1MP. Cal

- 12 - Range B/W: 110 dB Electronic Shutter AES: 1/30 ~ 1/25,000 sec Fix: 1/50,1/100,1/250,1/500,1/1000,1/2000,1/4000,1/10000 sec Gamma Correction 0.

- 13 - SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/SSL Ethernet 1 10/100BaseT(X) Ethernet port, RJ45 connector Standard OnVIF Local Storage SD socke

- 14 - Safety UL60950-1 EN50121-4 NEMA TS2 Class 1 Division 2 (Pending) Atex Zone 2 (Pending) EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-

- 2 - Overview The VPort 36-1MP Series is the world’s first rugged IP camera that withstands environmental temperatures ranging from -40 to 75°C with

- 3 - • Screw handle accessory package Inner hexagon screwdriver for tightening/ loosening lens holder C/CS mount adapter ring 5-pin terminal block

- 4 - Backlight Compensation: On/Off Auto Exposure: On/Off Image Rotation: Flip, Mirror, and 180° rotation Image Setting: Manually tuning with

- 5 - Bottom View NOTE You will find the mounting bracket fastened at the bottom of the camera. You can remove and reposition the bracket to the top

- 6 - Back Panel View 1. 5 pin terminal block for DI and relay connection 2. 2 pin terminal block for RS-485 pin connection 3. RJ45 port for PoE

- 7 - Hardware Installation Step 1: Remove lens cover Step 2: Loosen the lens holder pressing screw with the L-type inner hexagon screw driver

- 8 - Step 3: Remove lens holder NOTE Make sure to loosen the screw affixing the lens holder in step 2 before trying to remove the lens holder. The

- 9 - Software Installation Step 1: Configure the VPort 36-1MP’s IP address When the VPort 36-1MP is first powered on, the POST (Power On Self Test)