Moxa Technologies C168P User Manual download pdf (Page 72)

6-4 C168P User’s Manual

Step 8.

Power off the PC.

OFF

Step 9.

Remove the jumper on position JP1.

jumper

JP1

Remove

Step 10.

Power on the PC.

Windows NT

This section is specific for troubleshooting under Windows NT. For general

problems and solutions, please see the previous section, “General Troubleshooting”.

1. After the system reboots, the error message “Another driver in the system,

which did not report its resources, has already claimed the interrupt used

by xxx.” appears in the Event Log.

This indicates that the MOXA board is found, but the IRQ is conflicting with

another adapter. Please make sure there is no conflict with other adapter’s IRQ.

Check the BIOS IRQ settings first. Make sure that an IRQ is available.

2. After the system reboots, the error message “Cannot find any configured

MOXA Smartio/Industio Series board!” appears in the Event Log.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

No comments

Moxa Technologies C168P User Manual Page 72