Moxa Technologies MC-4510-C23 User Manual

MC-4510-C23 User’s Manual Third Edition, March 2011 www.moxa.com/product © 2011 Moxa Inc. All rights reserved.

MC-4510-C23 Hardware Introduction 2-3 LED Indicators LED Name LED Color LED Function Power Green Power is on and functioning normally Off P

3 3. Hardware Connection Description In this chapter, we show how to connect the embedded computers to the network and to various devices. The fol

MC-4510-C23 Hardware Connection Description 3-2 Installing the MC4510-C23 Wall or Cabinet Mounting The MC-4510-C23 has been pre-installed with two b

MC-4510-C23 Hardware Connection Description 3-3 Connecting the Power The MC-4510-C23 offers 18 to 36 VDC power input with the terminal block. If the

MC-4510-C23 Hardware Connection Description 3-4 Pin 10/100 Mbps 1000 Mbps 1 ETx+ TRD(0)+ 2 ETx- TRD(0)- 3 ERx+ TRD(1)+ 4 --- TRD(2)+ 5 --

MC-4510-C23 Hardware Connection Description 3-5 3. There is a tenon/hook on the cover of the CF socket. Turn the CompactFlash card over and then in

MC-4510-C23 Hardware Connection Description 3-6 PS/2 Connector Pin No. Signal Definition 1 PS/2 Keyboard Data 2 PS/2 Mouse Data 3 GND 4 VCC 5

MC-4510-C23 Hardware Connection Description 3-7 DB15 Female Connector Pin No. Signal Definition 1 Red 2 Green 3 Blue 4 NC 5 GND 6 GND 7 GND

MC-4510-C23 Hardware Connection Description 3-8 Connecting to a Speaker or a Headphone The MC-4510-C23 comes with audio input and output interfaces

MC-4510-C23 Hardware Connection Description 3-9 4. Remove the back cover of the computer. You will see two HDD brackets inside. The memory module i

MC-4510-C23 User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the t

MC-4510-C23 Hardware Connection Description 3-10 7. When finished, replace the first HDD bracket and the back cover of the computer. Installing a

MC-4510-C23 Hardware Connection Description 3-11 Installing the Hard Disk on the First HDD Bracket 1. Remove the four screws on the first HDD brack

MC-4510-C23 Hardware Connection Description 3-12 4. When finished, place the bracket on the computer, and use four screws to fasten the bracket. Ne

MC-4510-C23 Hardware Connection Description 3-13 Installing the Hard Disk on the Second HDD Bracket 1. Remove the four screws on the second HDD bra

MC-4510-C23 Hardware Connection Description 3-14 4. When finished, place the bracket on the computer, and use four screws to fasten the bracket. Ne

4 4. BIOS Setup This chapter describes the BIOS settings of the MC-4510-C23 computer. The BIOS is a set of input/output control routines for perip

MC-4510-C23 BIOS Setup 4-2 Entering the BIOS Setup Utility To enter the BIOS setup utility, press the “Del” key while the system is booting up. The

MC-4510-C23 BIOS Setup 4-3 System Security To set up system security, select the “Security” option under “Main” to bring up the following screen. T

MC-4510-C23 BIOS Setup 4-4 Hard Disk Boot Priority First/Second/Third Boot Device This option allows users to select or change the device boot prior

MC-4510-C23 BIOS Setup 4-5 C1E Function This item allows you to configure the power-saving mode when the CPU is in C1 status. Options: Auto (defaul

Table of Contents 1. Introduction ...

MC-4510-C23 BIOS Setup 4-6 DVMT Mode Sets the Dynamic Video Memory Technology operating mode. When set to “Fixed,” the graphics driver will reserve

MC-4510-C23 BIOS Setup 4-7 OnChip IDE Device SATA Mode This item allows you to select the IDE mode or AHCI mode for your SATA hard disk.. Options:

MC-4510-C23 BIOS Setup 4-8 Super I/O Device Debug Port This function allows you to enable/disable the debug port communication. This port is only f

MC-4510-C23 BIOS Setup 4-9 HPET Support This item allows you to enable/disable the HPET (High Precision Event Timer) function. Option: Enabled (defa

MC-4510-C23 BIOS Setup 4-10 Warning Beep This item allows you to enable/disable the warning beep. Options: Disabled (default), Enabled Load Defaults

MC-4510-C23 BIOS Setup 4-11 Exiting the BIOS Setup To exit the BIOS setup utility, choose “Exit.” Pressing <ESC> will achieve the same result.

MC-4510-C23 BIOS Setup 4-12 ATTENTION We suggest you use a USB drive with under 2 GB in disk space, as larger USB drives may not support FAT file

MC-4510-C23 BIOS Setup 4-13 5. Press “+” to move it up to the first priority, and press “Esc” to exit the setup menu. 6. Make sure the first boot

MC-4510-C23 BIOS Setup 4-14 5. Please note that once the BIOS is successfully upgraded, the default BIOS values will be automatically loaded. Howe

A A. Regulatory Approval Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) T

1 1. Introduction The MC-4510-C23 computer is based on the Intel Core 2 Duo mobile processor and comes with 2 optically isolated RS-232/422/485 se

MC-4510-C23 Introduction 1-2 Overview The MC-4510-C23 computer is based on the Intel Core 2 Duo mobile processor and comes with 2 optically isolated

MC-4510-C23 Introduction 1-3 MC-4510-C23 Hardware Specifications Computer CPU: Intel Core 2 Duo SP9300 2.26 GHz, 6 MB for L2 cache OS: Windows 7, Wi

MC-4510-C23 Introduction 1-4 Input Voltage: 18 to 36 VDC (3-pin terminal block) Power Consumption: 48.6 W • 1.35 A @ 36 VDC • 1.96 A @ 24 VDC • 2.6

2 2. Hardware Introduction The MC-4510-C23 computer is compact, well-designed, and built rugged enough for industrial applications. LED indicators

MC-4510-C23 Hardware Introduction 2-2 Appearance MC-4510-C23 Front View Dimensions