Moxa Technologies UC-8410 User Manual download pdf (Page 12)

UC-8410 Hardware User’s Manual Appearance and Dimensions

Reset Button

The button labeled Reset returns the UC-8410 to its factory default configuration.

Press the Reset button continuously for at least 5 seconds to load the factory default

configuration. After the factory default configuration has been loaded, the system will reboot

automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a

steady glow once the system has rebooted.

We recommend that you only use this function if the software is not working properly and you

want to load factory default settings. To reset an embedded Linux system, always use the software

reboot command />reboot to protect the integrity of data being transmitted or processed.

ATTENTION

Reset button preserves user’s data

The Reset button will NOT format the user directory and erase the user’s data. Pressing the

Reset button will only load the configuration file. All files in the /etc directory will revert to their

factory defaults, but other user data will still exist in the Flash ROM.

Real Time Clock

The UC-8410’s real time clock is powered by a lithium battery. We strongly recommend that you

do not replace the lithium battery without help from a qualified Moxa support engineer. If you

need to change the battery, contact the Moxa RMA service team.

WARNING

There is a risk of explosion if the battery is replaced by an incorrect type.

2-5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

No comments

Moxa Technologies UC-8410 User Manual Page 12