Moxa Technologies IMC-101 Installation Guide

Moxa Industrial Media Converter IMC-101 Hardware Installation Guide Fifth Edition, June 2008 © 2008 Moxa Inc., all rights re

10SC-Port Pinouts SC-Port to SC-Port Cable Wiring TxRx AABBCable WiringA AB B ST-Port Pino

11Dip Switch Setting IMC-101 series DIP switch 123ON DIP Dip Switch 1 (Default: Off ) ON: Enables the PORT Alarm. If the port’s link fails, the

12 On FX port’s 100 Mbps is active BlinkingData is being transmitted at 100 Mbps 100M (FX) GREEN Off 100BaseFX port is inactive On 100BaseFX port

13Specifications Technology Standards IEEE802.3, 802.3u, Link Fault Pass-Through Interface RJ45 ports 10/100BaseT(X) Fiber ports 100BaseFX (SC

14Revision History Document Edition Revision Date Revision Details 2nd June 15, 2004 1. Updated the edition of this manual on the title page.

2Overview Moxa Industrial Media Converter, which is specially designed for reliable and stable operation in harsh industrial environments, provides

3Panel Layout of IMC-101 Series V1 V2 INPUTS: 24 VDCPWR2V2+V2-V1-V1+FAULTPWR112 3ON DIPPORT ALARMFDX /COLFDX /CO LTop Panel ViewRear Pane

4Mounting Dimensions Back View Front ViewSide View10.6510.6530.50++57.0513.9066.80510106Panel Mount Kit (Unit = mm)135.0013.10 15.10++25.4013.9018.2

5DIN-Rail Mounting The aluminum DIN-Rail attachment plate should be fixed to the back panel of IMC when you take it out of the box. If you need to r

6STEP 2: Mounting Moxa Industrial Media Converter on the wall requires 4 screws. Use the IMC, with wall mount plates attached, as a guide to mark th

7WARNING This equipment has been evaluated as EEx nC IIC T4 equipment under DEMKO Certificate No. 03 ATEX 0324537U. Each module is marked with II

8 ATTENTION This product is intended to be mounted to a well-grounded mounting surface such as a metal panel. Wiring the Alarm Contact The Alarm C

9Communication Connections IMC-101 models have one 10/100BaseT(X) Ethernet port, and one 100BaseFX (SC or ST type connector) fiber port. 10/100BaseT