Moxa Technologies DE-301 User Manual download pdf (Page 125)

LCD Panel Configuration

NPort Server Lite User’s Manual B-3

As you use the buttons to operate the LCD display, you will notice that with very few

exceptions, moving up one level causes the bottom line of the display to move to the top

line of the display. Taking a look at the tree graph, you will also notice that the bottom

three options in level 2, and all of the options in level 3 have either a C or D attached. The

meaning is as follows:

l C = configurable: i.e., you are allowed to change the setting of this option

l D = display only: i.e., the setting for this option is displayed, but it cannot be

changed (this does NOT necessarily mean that the number doesn’t change; only

that you can’t change it).

Some options are different, depending on the NPort Server Lite model, or Operation Mode.

For example,

l The Interface attribute under Port Setting is display only for model DE-301,

but configurable for model DE-331.

l The Baud rate, Parity, Stop bit, Data bit, and Flow control attributes

under Port Setting are display only for servers configured in Host-Based Mode,

and configurable for NPort Server Lites configured in Pair-Connection Mode.

It would be a good idea to print out the tree graph and keep it near NPort Lite Server for

easy reference.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 134 135

No comments

Moxa Technologies DE-301 User Manual Page 125