Moxa Technologies EDS-728 Installation Guide

Moxa EtherDevice Switch EDS-728/828 Hardware Installation Guide First Edition, January 2008 Moxa Inc. Tel: +886-2-8919-1230

9MDI/MDI-X Port Pinouts Pin Signal 1 TRD(0)+ 2 TRD(0)- 3 TRD(1)+ 4 TRD(2)+ 5 TRD(2)- 6 TRD(1)- 7 TRD(3)+ 8 TRD(3)- 1

10On This EDS-728/828 is the Master of this Turbo Ring. BlinkingThis EDS-728/828 has become Ring Master of this Turbo Ring after the Turbo Ring was

11Fast Ethernet Module LEDs On Power is being supplied to the interface module. PWR GREENOff Power is not being supplied to the interface module. P

12Digital Inputs Two inputs with the same ground, but electrically isolated from the electronics. x For state “1”: +13 to +30V x For state “0”: -30

13Optical Fiber/SFP-1GxxxLC Series SX LX LHX ZX Wavelength 850 nm 1310 nm 1310 nm 1310 nm Max. Tx -4 dBm -3 dBm 1 dBm +5 dBm Min. Tx -9.5

14IM-2MSC/2TX: Interface Module with 2 multi mode 100BaseFX ports, SC connectors, and 2 10/100BaseT(X) ports, RJ45 connectors. IM-2MST/2TX: Interfac

15IM-2MST/2TX 250 g IM-2SSC/2TX 245 g IM-1LSC/3TX 235 g IM-4MSC 250 g IM-4MST 270 g IM-4SSC 270 g Environmental Operating Temperature 0 to

1Panel Layout of EDS-728/828 Series COUPLERMODERINGPORTCOUPLERPORTFDX/HDXSTATPWR1 FAULTMASTERPWR2LNK/ACTSPEEDIM-4MSCTXRX34TXRX12PWRP3P1P4P2IM-4MSTTX

213 1314 1515 1316 1. System status LEDs 2. Push-button switch to select mode for Interface Module 3. Interface Module mode LEDs 4. Fast Ethe

3Mounting Dimensions (unit = mm) 381.703085.00142.47Front ViewEtherDevice Switch80.6201.2362.40401.00Rear View128.00142.47140.00Side ViewGigabit Eth

4DIN-Rail Mounting The DIN-Rail attachment plates are permanently fixed to the back panel of the EDS-728/828. Do not attempt to remove the attachmen

5STEP 2: Mounting the EDS-728/828 on the wall requires 4 screws to ensure that the switch does not come loose from the wall. Use the switch, with wa

6Wiring Requirements WARNING Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa EDS-728/828. Calculate th

7RELAY1RELAY2PWR1 PWR2V2+V2-V1+V1-DI1I1 I2DI2Top ViewFront ViewFAULT: The two sets of relay contacts of the 6-pin terminal block connector are used

8Communication Connections The pinout and cable wiring diagrams in this section show how the ports on the EDS-728/828 connect to other devices: Pino