Moxa EtherDevice™ Switch EDS-G509 Hardware Installation Guide Third Edition, July 2010 © 2010 Moxa Inc. All rights reserved.
- 10 -Multi mode: 100BaseFX 0 to 5 km, 1300 nm (50/125μm, 800MHz*km) 0 to 4 m, 1300 nm (62.5/125μm, 500MHz*km) Single mode: 100BaseFX 0 to 40 km,
- 11 -EDS-G509 Series DIP Switches 21------MASTERCOUPLERTURBORING43 The default setting for each DIP Switch is OFF. The following table explains the
- 12 -LED Indicators The front panel of the Moxa EDS-G509 contains several LED indicators. The function of each LED is described in the following tab
- 13 -Specifications Technology Standards IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w, 802.1Q, 802.1p, 802.1X, 802.3ad, 802.3z Protocols IGMPv1/v2,
- 14 - Fast Ethernet SFP-M SFP-S SFP-L Wavelength 1300 nm 1310 nm 1550 nm Max. Tx -18 dBm 0 dBm 0 dBm Min. Tx -8 dBm -5 dB
- 15 -Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 WARRANTY 5 years Technical Support Contact Information www.moxa.com/supp
- 2 -Package Checklist The Moxa EDS-G509 is shipped with the following items. If any of these items is missing or damaged, please contact your custom
- 3 -Panel Views of EDS-G509 56132124334432176891234510Front Panel ViewTop Panel ViewRear Panel ViewMSTR/HEADCPLR/TAILFront Panel: 1. 1 to 4: 10/100
- 4 -DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the EDS-G509 when you take it out of the b
- 5 -Do not screw the screws in all the way—leave about 2 mm to allow room for sliding the wall mount panel between the wall and the screws. STEP 3—O
- 6 -Please read and follow these guidelines: y Use separate paths to route wiring for power and devices. If power wiring and device wiring paths mu
- 7 -Wiring the Redundant Power Inputs The EDS-G509 has two sets of power inputs—power input 1 and power input 2. The top two contacts and the bottom
- 8 -Terminal Emulator, to access the EDS-G509’s serial console. (Baudrate: 115200 bps, no parity, 8 data bit, 1 stop bit) RJ45 (10-pin) Console Port
- 9 -1000BaseT RJ45 Pinouts Pin MDI MDI-X1 BI_DA+ BI_DB+2 BI_DA- BI_DB-3 BI_DB+ BI_DA+4 BI_DC+ BI_DD+5 BI_DC- BI_DD-6 BI_DB- BI_DA-7 BI_DD+ B
Comments to this Manuals