Moxa Technologies EDS-G509 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
www.moxa.com email: [email protected]
2-10
2
Managed Ethernet Switches
Industrial Ethernet Solutions for Control and Automation
EDS-518A Series
Introduction
The EDS-518A is a standalone 18-port managed Ethernet switch that
provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for
Gigabit optic communication. The Ethernet redundant Turbo Ring
(recovery time < 20 ms) increases the reliability and speed of your
network backbone. The EDS-518A also supports intelligent network
management functions, including QoS, IGMP snooping/GMRP, VLAN,
Port Trunking, SNMPv1/v2c/v3, IEEE 802.1X, HTTPS, and SSH.
2 Gigabit plus 16 fast Ethernet ports for copper and fiber
Turbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D)
for Ethernet redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3,
RMON supported
IEEE 802.1X, HTTPS, and SSH enhance network security
ABC-01 (Automatic Backup Configurator) for system configuration
backup
Technology
Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and
100Base FX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/
LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree
Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE
802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for
Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP,
HTTPS, Telnet, SSH, Syslog
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB,
RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control Interface
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed
Fiber Ports: 100BaseFX (SC/ST connector), and 1000BaseSFP slot
Console: RS-232 (RJ45)
Specifications
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port),
MASTER, COUPLER
Alarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC
Digital Inputs: Two inputs with the same ground, but electrically isolated from
the electronics.
+13 to +30V for state “1”•
-30 to +3V for state “0”•
Max. input current: 8 mA•
Optical Fiber
EDS-518A
Features and Benefits
Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP •
(IEEE 802.1w/D)
IGMP snooping and GMRP for filtering multicast traffic•
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •
planning
QoS-IEEE 802.1p and TOS/DiffServ to increase determinism•
Port Trunking for optimum bandwidth utilization•
IEEE 802.1X, HTTPS, and SSH to enhance network security•
SNMPv1/v2c/v3 for different levels of network management•
RMON for efficient network monitoring and proactive capability•
Bandwidth management prevents unpredictable network status•
ABC-01 (Automatic Backup Configurator) for system configuration backup•
Port mirroring for online debugging•
Automatic warning by exception through e-mail, relay output•
Digital inputs to integrate sensors and alarms with IP networks•
DIN-Rail or panel mounting capability•
100BaseFX
Multi Mode Single Mode
Single Mode,
80 km
Wavelength 1300 nm 1310 nm 1550 nm
Max. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance
5 km
a
4 km
b
40 km
c
80 km
d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
d. 9/125 μm, 19 PS/(nm*km) fiber optic cable
16+2G-port Gigabit managed Ethernet switch
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Comments to this Manuals

No comments