Moxa Technologies EtherDevice User Manual download pdf (Page 20)

EDS-508 Series User’s Manual Featured Functions

3-4

Password Setting

Setting Descriptions Factory Default

Old Password (Max.

16 Characters)

Type current password when changing

the password

None

New Password (Max.

16 Characters)

Type new password when changing the

password

None

Retype Password

(Max. 16 Characters)

If you type a new password in the

Password field, you will be required to

retype the password in the Retype new

password field before updating the new

password.

None

Accessible IP

Moxa EtherDevice Switches use an IP address-based filtering method to control access to the

EDS.

Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent

unauthorized access. Access to EtherDevice Switch is controlled by IP address. That is, if a host’s

IP address is in the accessible IP table, then the host will be allowed access to the EtherDevice

Switch. You can allow one of the following cases by setting this parameter

# Only one host of specific IP address can access the NE-4000T

Enter “IP address/255.255.255.255” (e.g., “192.168.1.1/255.255.255.255”)

# Hosts on the specific subnet can access the NE-4000T

Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”)

# Any host can access the NE-4000T

Disable this function. Refer to the following table for more configuration examples.

Allowable Hosts Input format

Any host Disable

192.168.1.120 192.168.1.120 / 255.255.255.255

192.168.1.1 to 192.168.1.254 192.168.1.0 / 255.255.255.0

192.168.0.1 to 192.168.255.254 192.168.0.0 / 255.255.0.0

192.168.1.1 to 192.168.1.126 192.168.1.0 / 255.255.255.128

192.168.1.129 to 192.168.1.254 192.168.1.128 / 255.255.255.128

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

No comments

Moxa Technologies EtherDevice User Manual Page 20