Moxa Technologies V2401 User Manual download pdf (Page 14)

MC-4510-C23 HW User’s Manual Hardware Connection Description

3-3

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or wiring your MC-4510-C23.

Wiring Caution!

Calculate the maximum possible current in each power wire and common wire. Observe all

electrical codes dictating the maximum current allowable for each wire size.

If the current goes above the maximum ratings, the wiring could overheat, causing serious

damage to your equipment.

Temperature Caution!

Be careful when handling the unit. When the unit is plugged in, the internal components generate

heat, and consequently the outer casing may feel hot to the touch.

Connecting the Power

The MC-4510-C23 offers 18 to 36 VDC power input with the terminal block. If the power is

supplied properly, the Power LED will light up. The OS is ready when the Ready LED glows a

solid green.

Grounding the MC-4510-C23

Grounding and write routing help limit the effects of noise due to electromagnetic interference

(EMI). Run the ground connection from the ground screw to the grounding surface prior to

connecting the power.

ATTENTION

This product is intended to be mounted to a well-grounded mounting surface, such as a metal

panel.

EG: See the figure shown below for the location of the Earth Ground on the terminal block power connector.

Connect the EG wire to an appropriate grounded metal surface.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

No comments

Moxa Technologies V2401 User Manual Page 14