Moxa Technologies V2401 User Manual download pdf (Page 15)

MC-4510-C23 HW User’s Manual Hardware Connection Description

3-4

Connecting Data Transmission Cables

This section describes how to connect the MC-4510-C23 computer to the network and serial

devices.

Connecting to the Network

Plug your network cable into the embedded computer’s Ethernet port. The other end of the cable

should be plugged into your Ethernet network. When the cable is properly connected, the LEDs on

the embedded computer’s Ethernet port will glow to indicate a valid connection.

The 10/100/1000 Mbps Ethernet LAN port uses 8-pin RJ45 connectors. The following diagram

shows the pinouts for these ports.

The LED indicators on the right top and right bottom corners glow a solid

green color when the cable is properly connected to a 100 Mbps Ethernet

network. The LED will flash on and off when Ethernet packets are being

transmitted or received.

LAN 1

LAN 2

The LED indicators on the left top and left bottom corners glow a solid

yellow color when the cable is properly connected to a 1000 Mbps

Ethernet network. The LED will flash on and off when Ethernet packets

are being transmitted or received.

Pin 10/100 Mbps 1000 Mbps

1 ETx+

TRD(0)+

2 ETx-

TRD(0)-

3 ERx+

TRD(1)+

4 ---

TRD(2)+

5 ---

TRD(2)-

6 ERx-

TRD(1)-

7 ---

TRD(3)+

8 ---

TRD(3)-

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

No comments

Moxa Technologies V2401 User Manual Page 15