Moxa Technologies 331 User Manual download pdf (Page 11)

UC-7112-LX Plus Software User’s Manual Getting Started

2-3

The following window will open when a connection has been established.

To log in, type the Login name and password as requested. The default values are both root:

Password: root

Telnet Console

If you know at least one of the two IP addresses and netmasks, then you can use Telnet to connect

to the UC-7112-LX Plus’s console utility. The default IP address and netmask for each of the two

ports are given below:

Default IP Address Netmask

LAN 1

192.168.3.127 255.255.255.0

LAN 2

192.168.4.127 255.255.255.0

Use a cross-over Ethernet cable to connect directly from your PC to the UC-7112-LX Plus. You

should first modify your PC’s IP address and netmask so that your PC is on the same subnet as one

of the UC-7112-LX Plus’s two LAN ports. For example, if you connect to LAN 1, you can set

your PC’s IP address to 192.168.3.126 and netmask to 255.255.255.0. If you connect to the LAN 2,

you can set your PC’s IP address to 192.168.4.126 and netmask to 255.255.255.0.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 100 101

No comments

Moxa Technologies 331 User Manual Page 11